TUW-60 fluorocarbon solvent (such as AF solvent), electronic cleaning agent

전자 불화 액체


TUW-60 Product technical specification(TDS)

 

Product name:
TUW-60 Fluorinated liquid

Application preparation :
TUW-60 is a colorless and odorless transparent liquid widely used in precision cleaning, solvent diluents, and can also be used for preparing polymers, synthesizing surfactants, polymer additives, and so on. Widely used as a cooling medium, fluorocarbon solvent (such as AF solvent), and electronic cleaning agent.
Immersion phase change liquid cooling can be used in various data service centers such as cloud computing data centers, ultra-high voltage power grids, high-speed rail power inverters, lithium-ion battery powered vehicles, wind turbines, nuclear power, military radar systems, etc;
It can also be used for temperature control, heat transfer, and packaging testing in the semiconductor industry.

Product characteristics :
Features: colorless, tasteless, non- toxic, safe, non flammable, mild solubility, insoluble in water, good thermal stability, high density, low surface tension, low viscosity, low latent heat of evaporation, excellent material compatibility.
Advantages: environmental protection and cleanliness, safe use, good insulation performance, no damage to electronic precision equipment, and no damage to electronic components and  circuits.  Through distillation regeneration, the amount  of industrial waste  is greatly reduced and the effect of rapid drying can be achieved.

Product application scope :
1.Solvent: fluorocarbon solvent and AF    solvent;
2.Liquid leakage at the side of electronic components, air tightness test of electronic parts  (IC,  LSI parts) or  electronicdevices;
3.Live  cleaning equipment and insulating    fluid;
4.Electronic precision cleaning, optical cleaning and dehydration cleaning;
5.Heat  transfer fluid and cooling    medium;
6.Hydraulic transmission fluid and electronic equipment sealing isolation fluid;
7.Solvent diluent, lubricant diluent, polymer additive, special purpose solvent, etc;
8.Make polymer monomers with strong heat and corrosion resistance, good hydrophobicity and low dielectric    constant;
9.Used for temperature control, heat transfer, and packaging testing in the semiconductor industry.

Product attributes :

boiling point

60℃

colour

none

density

1.68g/cc

flash point

none

surface tension

12.7mN/m

specific heat

1.31J/g℃

Saturated water content

45ppm

viscosity

0.6mPa.s

Heat of vaporization

123J/g℃

dielectric constant

1.92

ODP

0

Combustion range

none

GWP

20

Dielectric strength

53kV

PH value

7

GDP

Low

smell

tasteless

 

 

 

Product storage and transportation :
1.TUW-60 shall be stored in a clean and dry warehouse to prevent high temperature sunlight, away from heat source, away from acid, strongalkali, oxidant, etc.
2.TUW-60 is a non-toxic, non combustible, colorless and transparent liquid. It is transported as non dangerous goods. Violent oscillation shall be avoided during transportation and inversion shall be avoided during stacking.

Product safety and precautions :
1. Local regulations on  normal  protection and industrial hygiene related to  chemical treatment must be observed,and thermal decomposition products shall not be  inhaled.  Avoid  skin  contact with hot substances.
2.Do  not eat,drink or smoke when using this product. Clean thoroughly after operation. Avoid release into the environment. Avoid contact with oxidants (such as chlorine, chromic acid,etc.).
3.When  using  this  product,  we  should  abide  by  the   information  and suggestions provided  in our  chemical  safety  technical  manual. Basic precautions for handling chemicals should also be in place.

Product safety and precautions:
1.Local regulations on normal protection and industrial hygiene related to chemical treatment must be observed,    and thermal decomposition products shall  not be inhaled. Avoid skin contact with hot substances.
2.Do not eat, drink  or  smoke  when  using  this  product.  Clean  thoroughly after operation. Avoid release into the environment. Avoid contact with oxidants (such as chlorine, chromic acid, etc.).
3.When using this product, we should abide by the information and suggestions provided in our chemical safety technical manual. Basic precautions for handling chemicals should also be in place. 

 

Company  name:  Shenzhen Huayi Brother Technology Co., Ltd
Office  address:  South China city development building, Pinghu street, Longgang District, Shenzhen
Factory address: jieying Technology Park, Bihu Avenue, Fenggang town, Dongguan
Tel: 0755-23737136 or +86 15914124590

 

관련 제품